Reference : http://gnuradio.4.n7.nabble.com/Failed-to-set-TX-frequency-tt13429.html#a13431
Hi Johnathan,
Sorry for not being clear. I was making a new usrp_source.py & usrp_sink.py files (attached below) to be posted to gunradio. Testing the new usrp_source.py code was ok for all frequencies and daughter boards. However, testing usrp_sink.py code, with TX frequencies between 44MHz and 83 MHz gave me the tuning function failing indication which I use it to print the message "Failed to set TX frequency". This is strangely happening to the Basic TX daughter board only in this frequency range.
Firas,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The digital upconverters in the AD9862 don't allow you to set the
frequency to values close to the nyquist frequencies. Since it samples
at 128 MHz, the prohibited ranges are around multiples of 64 MHz.
Matt
Hi Johnathan,
Sorry for not being clear. I was making a new usrp_source.py & usrp_sink.py files (attached below) to be posted to gunradio. Testing the new usrp_source.py code was ok for all frequencies and daughter boards. However, testing usrp_sink.py code, with TX frequencies between 44MHz and 83 MHz gave me the tuning function failing indication which I use it to print the message "Failed to set TX frequency". This is strangely happening to the Basic TX daughter board only in this frequency range.
Firas,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The digital upconverters in the AD9862 don't allow you to set the
frequency to values close to the nyquist frequencies. Since it samples
at 128 MHz, the prohibited ranges are around multiples of 64 MHz.
Matt
No comments:
Post a Comment